ista/p 41 версия

[SergBMW]

Поделитесь пожалуйста ISTA_P_2.41.1

[Ural]

Сообщение от SergBMW

Поделитесь пожалуйста С ISTA_P_2.41.1

Тогда уж ISTA_P_2.40.2 или ISTA_P_2.40.1

Я как понял ISTA_P_2.41.1 ещё не вышла.

[Только для зарегистрированных...]

Но делиться всё равно никто не будет.

[NUFLIN]

Сообщение от Ural

Тогда уж ISTA_P_2.40.2 или ISTA_P_2.40.1

Я как понял ISTA_P_2.41.1 ещё не вышла.

Вышла давным-давно...

[Duplex]

так уже 23 марта вышла

[Ural]

Понятно,
снова лопухнулся

Думал информация в ссылке постоянно обновляется.

Спасибо за инфу.

[SergBMW]

Поделитесь ISTA_P_2.41.1, надо CIC обновить для подключения combox в е60...

[vinzer]

Сообщение от SergBMW

Поделитесь ISTA_P_2.41.1, надо CIC обновить для подключения combox в е60...

А можно пожайлуста поподробнее с этого момента. Особенно интересует появление 6VC в 41ой для Е6х

Подсказка здесь: E60AT.000

[asd55]

41.2 уже вышла.... вот сам ищу, не могу сис на е70 закодировать после дилеров.

[Morauder]

Сообщение от Duplex

так уже 23 марта вышла

А где скачать?

[rahim]

Кто нибудь может перевести это все пожалуйста , мне нужно обновить ИНПУ , с прогманом проблемы никак не могу связать адаптер D-CAN через вмаер. Помогите кто шарит в этом .
Here is a step-by-step guide for updating SSS Progman V32 with the ISTA/P V38 data files:

- Before you start, you need a lot of free space on your hard drive: about 30-40 GB. You should clear up some space first.

- Download ISTA/P V38 from here:

[Только для зарегистрированных...]

and use winrar to extract its contents onto c:\

- Download jetunpack from here:

[Только для зарегистрированных...]

and use winrar to extract its contents onto c:\

- Open Daemon Tools Lite and mount c:\ISTA_P_V38\ISTA_P_2.38.0_Disk1_3.iso. On my machine, it's mounted onto drive F: but it may be different on your machine. If so, you'll need to change F: to the mounted drive on your machine in the below instructions.

- Open a command window (press Windows key+R to bring up run menu, type cmd and press return)

- Type

md C:\BMW
md C:\BMW\ISTA_V38
cd C:\jetunpack
jetunpack F:\ISTA-P-AInst_38.0.0_--.jetarch c:\BMW\ISTA_V38\
jetunpack F:\ISTA-P-Client_38.0.0_--.jetarch C:\BMW\ISTA_V38\

- Open Daemon Tools Lite and unmount the iso. Mount c:\ISTA_P_V38\ISTA_P_2.38.0_Disk2_3.iso

- Go to the command window and copy ISTA-P-Server_38.0.0_--.jetarch.part1 and version.ini to your c:\jetunpack directory

copy F:\*.* .

- Open Daemon Tools Lite and unmount the iso. Mount c:\ISTA_P_V38\ISTA_P_2.38.0_Disk3_3.iso

- Go to the command window and copy ISTA-P-Server_38.0.0_--.jetarch.part2 to your c:\jetunpack directory

copy F:\ISTA-P-Server_38.0.0_--.jetarch.part2 .

- Now you're ready to unpack the final 2 files. Type

jetunpack ISTA-P-Server_38.0.0_--.jetarch C:\BMW\ISTA_V38\

This is going to take a while so be patient.

- Run winrar and open SP.7z in the C:\BMW\ISTA_V38\files\data directory. Select the sp-daten-*** directory for your chassis and extract it. I extracted the sp-daten-e89 directory to c:\ since I want the latest data files for my E90. The below instructions apply to the E90 but you can modify it for your particular chassis.

- Run VMware.

- Open the SSS Progman virtual machine tab in VMware.

- Double click on the hard drive to bring up the settings dialog.

- Click on Utilities -> Map...

- Choose volume number 1 and remove the checkmark next to "Open file in read-only mode"

- Click OK

- Open Regedit (press Windows key+R to bring up run menu, type regedit and press return)

- Select HKEY_LOCAL_MACHINE in the registry editor window

- Click on File -> Load Hive...

- Browse to the file Z:\Windows\System32\Config\Software and click Open

- Give the hive a name like BASE31

- Browse to HKEY_LOCAL_MACHINE\BASE31\Microsoft\Windows NT\Current Version\Winlogon

- Find the value of SHELL and double-click it. The value data should be set to

D:\Programme\IFS\Shell\Progman.exe 80 /cipb/ProgmanAdmin/start.php?mode=init

- Change it to

explorer.exe

- Collapse the folder tree so that BASE31 is highlighted

- Click File > Unload Hive.

- Close the registry editor

- If you have the Z: drive open in file explorer, make sure that you close it

- Return to VMware, open the properties for the hard drive and select Utilities > Disconnect

- Back to your laptop. Open file explorer, locate your sp-daten-89 directory, right click on it, and select Sharing and Security from the popup menu

- Click on Share this folder. Remember the share name. My share name is SP-daten-E89.

- Click OK

- Go to VMWare and start your SSS Progman virtual machine. It should boot into the desktop

- Click on Start -> My Computer to open a file explorer window

- Browse to D:\Programme\IFS\SP. This directory contains the data folders for different chassis. Choose the one you want to update and double click on it to open it. I opened the E89 folder

- Press CTRL+A and then the Delete key to delete the contents of the E89 folder

- Click on Start -> My Computer to open another file explorer window

- Type \\mylaptop\ShareName where mylaptop is the name of your laptop (go into My Computer -> Properties -> Computer Name if you don't know the laptop name) and ShareName is the share name from the above step. e.g., on my computer, I typed \\mylaptop\\SP-daten-E89. Now you should see the files/folders you extracted from SP.7z

- Press CTRL+A to select all of the files/folders in this directory

- Drag+drop them into the D:\Programme\IFS\SP\E89 folder

- After it's done copying the files,

add the folder "work" in the E89 directory.
Add a folder in the E89\data directory called "konv.tmp"

Leave both folders empty.

Your E89 folder structure should look something like this now:

cfgdat
data/konv.tmp
daten
ecu
format
kmmData
sgdat
work

- Open Regedit in the virtual machine (press Windows key+R to bring up run menu, type regedit and press return)

- Browse to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\Current Version\Winlogon

- Find the value of SHELL and double-click it. The value data should be set to

explorer.exe

- Change it back to

D:\Programme\IFS\Shell\Progman.exe 80 /cipb/ProgmanAdmin/start.php?mode=init

- Close the registry editor and restart the VM. SSS Progman is now using the V38 data files!